Announcement

Collapse
No announcement yet.

2.5 beta installation finishes at [email protected]:~$

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2.5 beta installation finishes at [email protected]:~$

    I have the 2.5 beta image on a USB connected to a Tranquil server. When the initial multi install options come up I select install 2.5 beta following https://wiki.vortexbox.org/vortexbox...n_instructions.

    When that finishes (fails) it leaves me at a command line [email protected]:~$

    If I do an exit it reboots and if I disconnect the usb stick is says there is no bootable device.

    The installation page/faq does not cover this scenario as far as I can see.

    Any advice is much appreciated.

    Should I install 2.4 instead?
    Last edited by boardtc; 08-16-2019, 05:13 AM.

  • #2
    You’re there. Reboot and log in (login ID = root, pass = vortexbox). Then follow instructions for adjusting partition and update.

    Comment


    • #3
      Originally posted by TrivQuad View Post
      You’re there. Reboot and log in (login ID = root, pass = vortexbox). Then follow instructions for adjusting partition and update.
      Sorry if my post was misleading. If I plug out the usbkey and reboot it says there is no bootable device. Ths indicates to me that the installation failed? Am I missing something?

      Comment

      Working...
      X