Announcement

Collapse
No announcement yet.

Vortexbox Appliance Not Found on New Network

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bart
    replied
    Perfect!
    Connecting the old modem and router to reset your Vortexbox sounds computer savvy to me.
    Though connecting a keybourd and monitor directly into the vortexbox and after a reboot 'manually' typing a command will sound more computer savvy to others.

    Anyway enjoy your music !

    /bart

    Leave a comment:


  • mentalboy
    replied
    Once I realized that I could connect the old modem and router without it having to be connected to the internet, I was able to reset the vortexbox to DHCP. (I did mention that I'm not very computer savvy.) That fixed the problem. Thanks again for leading me there.

    Leave a comment:


  • mentalboy
    replied
    Bart, Thanks for your quick reply. I have attempted to attach my laptop via ethernet cable and using cryptoterm. Unfortunately, the new modem will not see the old IP address so this is not possible. Will I have to bring the vortexbox to someplace else where it can be seen by the network in order to reset the network settings or is there some way I can get it to work with this new modem?

    Leave a comment:


  • bart
    replied
    mentalboy
    If you previously set a static IP-address in your Vortexbox you will have to undo this, at best before switching your modem or router (using the Network Configuration page in the VB GUI).
    If you forgot or are forced out (by a malfunctioning unit) you can do this by attaching a keyboard and monitor to your vortexbox and reset your network settings.
    Code:
    fix_network rebuild
    reboot
    see the wiki: How do I reset the network settings on my VortexBox

    cheers
    /bart

    Leave a comment:


  • mentalboy
    started a topic Vortexbox Appliance Not Found on New Network

    Vortexbox Appliance Not Found on New Network

    I have enjoyed using my vortexbox appliance for several years. However, I "upgraded' my modem today to a new modem and the appliance cannot be discovered on the network. My new modem's IP address is 192.168.0.1 and my vortexbox static address is/was 192.168.1.187. I assume from reading similar topics that that is not within range. But what can I do to correct this? Please note that I have limited technical experience/knowledge. I used advanced ip scanner but it couldn't find the device. I attempted to connect directly with cryptoterm but, of course, couldn't connect. Thanks for your help!
Working...
X